Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

 5 in stock

 79654116 GU79654116 79 65 41 16
 7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport Köwe, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS Köwe, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

 More than 5 in stock

Also fits Benelli 250 TS

Brakelight switch banjo bolt

See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14657959 GU14657959 14 65 79 59
 1465 7959 1465.7959 14.65.79.59

Pair of Ferodo FRP408 brake pads for Brembo 5165 4 piston single pin calipers

We advise checking your front caliper(s) have one not two pad pins.
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors Highest friction level available for motorcycle racing Developed by world champions for future world champions Stable friction level achieving excellent modulation Fast bedding-in period Applications to fit all major racing calipers Suitable for stainless steel and cast iron discs

 2 in stock

30654602-z 30654602 GU30654602 30 65 46 02
 3065 4602 3065.4602 30.65.46.02

Pair of organic EBC FA244 front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers)

Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736

 More than 5 in stock

 32654610 GU32654610 32 65 46 10
 3265 4610 3265.4610 32.65.46.10

Pair of EBC FA181TT rear brake pads

Also known as Guzzi ref. 30654626

 More than 5 in stock

05654630-z 05654630 GU05654630 05 65 46 30
 0565 4630 0565.4630 05.65.46.30

Also fits Royal Enfield Himalayan (Front)

Brembo remote brake master cylinder cover kit including screws, cap and rubber

Brembo ref. 110430890

 This part is available by special order, request a quote

 30661100 GU30661100 30 66 11 00
 3066 1100 3066.1100 30.66.11.00

Pair of EBC FA209 brake pads, used for front brake pads on Quota and Bellagio, rear brake pads for Cali 1400, Cali EV, Cali Stone, Cali Jackal and Special. All use Brembo PF2.3032 caliper

Also known as Guzzi ref. 30654626, AP8113627

 4 in stock

03654600-z 03654600 GU03654600 03 65 46 00
 0365 4600 0365.4600 03.65.46.00

Front brake master cylinder cap and rubber kit for Brembo PS 13 / PS16 master cylinder. Screw holes parallel to top and bottom edges

Brembo ref. 110430860

 1 in stock

Also fits Ducati 907 i.e.

Pair of EBC FA095 brake pads for Brembo 5165 single pin four piston calipers

We advise checking your front caliper(s) have one not two pad pins

 More than 5 in stock

30654602-z 30654602 GU30654602 30 65 46 02
 3065 4602 3065.4602 30.65.46.02

Also fits Magni Sfida